Wyeast Activator™ 2565 Kolsch Ale Yeast
This strain is a classic, true top cropping yeast strain from a traditional brewery in Cologne, Germany. Beers will exhibit some of the fruity character of an ale, with a clean lager like profile. It produces low or no detectable levels of diacetyl. This yeast may also be used to produce quick-conditioning pseudo-lager beers and ferments well at cold 55-60°F (13-16°C) range. This powdery strain results in yeast that remain in suspension post fermentation. It requires filtration or additional settling time to produce bright beers.
- Flocculation: low
- Attenuation: 73-77%
- Temperature Range: 56-70° F (13-21° C)
- Alcohol Tolerance: approximately 10% ABV
- American Wheat or Rye Beer
- Berliner Weisse
- Bière de Garde
- Cream Ale
- Düsseldorf Altbier
- Fruit Beer
- Northern German Altbier
- Spice, Herb, or Vegetable Beer
Instructions for the proper use of Activator™ packages:
- To activate, locate and move inner packet to a corner. Place this area in palm of one hand and firmly smack package with the other hand to break inner nutrient packet. Confirm inner packet is broken.
- Shake the package well to release the nutrients.
- Allow package to incubate and swell for three hours or more at 70-75°F (21-24°C) or immediately direct pitch into wort.
- Use sanitizing solution to sanitize the package before opening.
- Shake well, open and pour Activator™ into five gallons of well-aerated or oxygenated wort at 70-75°F (21-24°C).
- Maintain temperature until fermentation is evident: by CO2 bubble formation, bubbling airlock or foaming on top of wort.
- Adjust to desired fermentation temperature.
Full swelling of Activator™ packages is not required for their use. The contents of Activator™ packages may be direct-pitched without prior activation. Our smack pack technology is intended to be a tool for your use in determining viability, and in initiating metabolism for faster starts to fermentation.
Swelling of the packs before they are smacked .If the packs warm up, dissolved CO2 in the yeast slurry will come out of solution and cause the pack to swell. It is not going from liquid to a gas state.. the liquid form of CO2 only exists at extremely high pressure or extremely low temperatures.
The swelling DOES NOT indicate that there is an infection or cross contamination.